Height Dynamics pride themselves on providing specialist advice on all aspects of
Height Safety, Confined Space and Rescue.

Our frequently asked questions page attempts to provide answers to the myriad of questions our customers are faced with when working at height or in confined spaces. Naturally, given that there are any number of scenarios that are presented workers on a daily basis, we will not be able to list all the answers to your questions on this page. We encourage you to contact us with any of your questions and our specialist team will assist with your enquiry.

To meet AS/NZS 1891.1 2007, which is the standard that fall arrest lanyards are manufactured to, a lanyard must have either integral energy absorbing properties or a personal energy absorber attached to it. The energy absorber is tested to ensure that the force to the anchor point (and user) is no more than 6kN.

Even when using the “restraint technique” to prevent a fall from heights Section 5.2 of the Code of Practise* states that the restraint system (anchor, lanyard and harness) must conform with AS/NZS 1891 Industrial Fall-arrest Systems And Devices series.

*Download a copy of the Managing The Risk Of Falls At Workplaces Code Of Practice 2015 here.

Short answer:

A gas detector calibration is more thorough and confirms the accuracy of gas detection. Bump tests just check the sensor and alarm actually work.

A bump test doesn’t tell you anything about the accuracy of the gas detector’s performance, but it does give you confidence that it is working and is therefore suitable for use.

The gas detector calibration process involves testing the gas detector’s sensors against a known calibration standard (i.e. the contents of your bottle of calibration gas), and adjusting the gas detector to correct for any inaccuracies

How often should bump tests be carried out?

Best practice for a bump test is daily, and prior to use. Bump testing is the best way to make sure your gas detector actually works before you use it. How often should gas detectors be calibrated? Calibration frequencies differ between gas detectors and the manufacturer’s recommendation should be heeded. Height Dynamics calibrate all leading brands. Contact our team if you need help.

There is a large variety of equipment that rope access technicians use in their rope access kit. Download our Rope Access Equipment List for an overview.

There you will find items that have become industry standards such as the Petzl ID Descender or the Petzl ASAP Lock through to as well as items that are less commonly used like the ISC D4 or the CT Sparrow.

If you are new to the Rope Access industry training in the correct use of this equipment and the techniques used are mandatory. Further information on our Rope Access training courses can be viewed on our website.

While the Rope Access Equipment List covers the basics it is no substitution for advice from specialist equipment suppliers. Contact Height Dynamics experienced sales team for more information.

+ Contact Height Dynamics

+ Contact our Team